SoftTex Resilient Slip-Resistant Tape works great in the office, plant, locker room, or areas with barefoot traffic.
This product is not like bath products you would see at the hardware store. This surface has a deeply embossed surface that will perform in heavier duty applications, while still being comfortable for barefoot traffic.
We recommend this product in office environments and light plant uses, it can be very easily cleaned and will not trap dirt the way normal grit products can. It can easily mop the surface. Meets or exceeds ANSI A137.1/A326.3 (Dry) Dynamic Coefficient of Friction Test. AS/NZS 4586 Pendulum Test (Dry), considered "low slip potential" by UKSRG.
Preparation / Installation Instructions
It is very important that the surface the tape is being adhered to is free from all contamination such as dirt, dust, grease and oil. A combination of 50/50 alcohol and water solution is usually adequate for removing most contamination. The wiper/cloth should be changed frequently (white cloth recommended). Heavy accumulation may require more aggressive cleaning techniques.
Temperature is a critical factor in adhesive bonding and is often over-looked. All our tape products are intended to be applied in temperatures of not less than 50ºF (10ºC). In general the closer to room temperature the better the bonding.
Tape products should be smoothed down with 15 psi of pressure or more. This will aid adhesive 'wet out' and result in better bonding.
Once the tape has been applied, the adhesive bond will continue to strengthen as it has time to cure. The ambient temperature will affect this bonding time (the colder the slower), but as a general rule good bonding will not be fully achieved for 24-48 hours after the application. Full bond strength will be reached at 72 hours (70ºF).
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.